Paint Systems - Epoxies
 |
Awlgrip 545 Epoxy D8001/D3001 Primer Converter | |
|---|---|---|
| 545 Epoxy Primer is a multi-use epoxy primer used to seal filler primers and fairing work before applying topcoats. For use above and below the waterline. | Read More | |
 |
Awlgrip D6120/3730 Hullgard Primer & Converter | |
|---|---|---|
| Hullgard Extra Epoxy Primer is a holding primer, used as a base for subsequent fairing. | Read More | |
 |
AwlGrip D8002/D3002 High Build Primer & Converter | |
|---|---|---|
| High Build Epoxy Primer is an epoxy surfacer used where high build and filling is required. | Read More | |
 |
Awlgrip Awlfair Base Coats & Converters | |
|---|---|---|
| Awlfair premium epoxies trowelable fairing compound used for fairing, levelling and smoothing surface imperfections, caused by gauges, pitting, dents or weld seams. | Read More | |
 |
AwlGrip D8008/D3018 Ultra Build Primer/Converter | |
|---|---|---|
| Ultra Build Epoxy Primer is an epoxy primer sealer used where high build and filling is required. For above waterline use only. | Read More | |
.
 |
Seajet 117 Multipurpose Epoxy Primer | |
|---|---|---|
| Multipurpose high performance primer for anti-fouling and two component topcoats. | Read More | |
 |
TDS EPOXY FFE-200 Fairing & bonding | |
|---|---|---|
| TDS FFE-200 Universal Fairing & Bonding Epoxy is a custom blended epoxy mastic of high quality resins, activators and engineered fillers to yield a light weight, flexible and easily-sanded system | Read More | |
 |
West System 105/206A Resin Pack | |
|---|---|---|
| Epoxy Resin® is the base material on which all West System 105 System epoxy compounds are built. 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. | Read More | |
 |
West System 105B Resin | |
|---|---|---|
| Epoxy Resin® is the base material on which all West System 105 System epoxy compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. | Read More | |
 |
West System 206 Slow Hardener | |
|---|---|---|
| 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures | Read More | |
 |
West-System-403-Microfibers | |
|---|---|---|
| 403 Microfibers, a fine fiber blend, is used as a thickening additive with resin/hardener to create a multi-purpose adhesive, especially for bonding wood. | Read More | |
 |
West System 406 Colloidal Silica | |
|---|---|---|
| 406 Colloidal Silica is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406 is a very strong filler that creates a smooth mixture, ideal for general bonding and filleting. | Read More | |
 |
West System 407 Low-Density Filler | |
|---|---|---|
| 407 Low-Density filler is a blended microballoon-based filler used to make fairing putties that are easy to sand or carve. | Read More | |
 |
West System G/flex Epoxy Repair Kit - 650-K | |
|---|---|---|
| The 650-K kit contains 4 oz. each of viscous liquid G/flex 650 resin and hardener. Mixing ratio is 1:1. | Read More | |
 |
West System Glass Tape | |
|---|---|---|
| Versatile West System woven fabric tapes are ideal for reinforcing chines, hull/deck corners and similar structural applications. | Read More | |
 |
West Systems 405 Filleting Blend | |
|---|---|---|
| This strong, wood-toned filler is good for use in glue joints and fillets on naturally finished wood. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding. | Read More | |